Search In this Thesis
   Search In this Thesis  
العنوان
WT Based Approach to Calculate Electrical Power Components Defined in IEEE STD 1459-2010 and its Application to SAPC \
المؤلف
Mohamed, Gad Abd El-Meguid.
هيئة الاعداد
باحث / جاد عبد المجيد محمد
gad-abdelmeguid@yahoo.com
مشرف / مدحت مصطفى الجيندى
مشرف / نبيل حسن عباسى
abbasyna@hotmail.com
مناقش / عادل محمد أبو العلا
مناقش / أحمد رمضان عبد العزيز
الموضوع
Electrical Engineering.
تاريخ النشر
2015.
عدد الصفحات
113 p. :
اللغة
الإنجليزية
الدرجة
الدكتوراه
التخصص
الهندسة (متفرقات)
تاريخ الإجازة
1/5/2015
مكان الإجازة
جامعة الاسكندريه - كلية الهندسة - الهندسة الكهربية
الفهرس
Only 14 pages are availabe for public view

from 32

from 32

Abstract

This paper presents a high resolution approach based on wavelet transform (WT) for measurement of single phase power quantities defined in IEEE STD 1459-2010 specially in case of non-sinusoidal conditions of voltage and current waveforms. The proposed approach is divided into two stages, firstly using the advantage of discrete wavelet transform (DWT) in order to calculate the phasors (magnitude and phase angle) of fundamental frequency component of non-sinusoidal voltage and current waveforms, secondly using the advantage of discrete wavelet packet transform (DWPT) in harmonic analysis of non-sinusoidal waveforms in order to calculate RMS values of integer harmonics. Unlike existing approaches, the proposed approach provides higher resolution level of harmonics RMS values estimation. The developed approach is tested with the synthesised waveforms and obtained results are compared with results of the other