Search In this Thesis
   Search In this Thesis  
العنوان
Effect of pre- and post-bleaching on the color change of resin infiltrated enamel lesions versus sound bleached enamel :
الناشر
Hassan Ahmed Hassan Aboulazm ,
المؤلف
Hassan Ahmed Hassan Aboulazm
هيئة الاعداد
باحث / Hassan Ahmed Hassan Aboulazm
مشرف / Mai Mahmoud Yousry
مشرف / Amir Hafez
مشرف / Dina Wafik ElKassas
تاريخ النشر
2016
عدد الصفحات
87 P. :
اللغة
الإنجليزية
الدرجة
ماجستير
التخصص
Dentistry (miscellaneous)
تاريخ الإجازة
14/3/2017
مكان الإجازة
جامعة القاهرة - الفم والأسنان - Operative Dentistry
الفهرس
Only 14 pages are availabe for public view

from 150

from 150

Abstract

This study was conducted to evaluate the effect of pre- and post bleaching using 3 different in-office bleaching systems on the color change of resin infiltrated enamel lesions compared to sound bleached enamel. A total of 30 bovine incisors were used in this study. Teeth were divided into 3 groups (10 each) according to the utilized bleaching techniques (T - laser 1 activated, T - chemically activated and T - light activated. Three standardized 2 3 windows A, B and C (5mm x 7mm) were created on the labial surface of each tooth, one of which (window A) served as sound enamel (control). The other two windows were subjected to demineralization by immersion in demineralizing solution at pH 4.5 for 72 hours at 37{u00B0}C. Following that, Icon® resin infiltrant was applied to window C. Baseline window preparation was followed by in-office bleaching to the 3 windows using the 3 different systems. Laser-activated bleaching using laser White{u2122}20 bleaching system and Epic{u2122}10 diode Laser device, chemically-activated bleaching using Dash in-office whitening system and light activated bleaching using philips zoom whitening gel Following bleaching, Icon® resin infiltration was then applied to the demineralized bleached window to represent the pre-bleached resin infiltrated enamel. Color parameters (L*, a*, b*) and color difference (xE) were measured and calculated using a spectrophotometer after baseline preparation, bleaching and final Icon® application