الفهرس | Only 14 pages are availabe for public view |
Abstract The research aimed to design and manufacture of a rice transplanting machine with local materials suitable for small rice holdings and achieve the technical recommendations of Egyptian conditions. Also, testing and evaluating the manufactured machine under different operation conditions. The rice transplanting machine was designed and simulated by Solidworks software at Agricultural Engineering Department, Faculty of Agriculture, Tanta University, then the transplanting machine was manufactured, tested and evaluated at the Rice Mechanization Center, Agricultural Engineering Research Institute, Agriculture Research Center, Egypt. The field experiments were conducted during rice agricultural season of 2022 on the most common rice crop variety (Sakha super 300). The stress analysis simulation results for machine parts will not fail under the given stresses as the maximum stresses were lower than the yield strength of the parts material and it will not carry out any significant deformations according to the loading conditions applied. |