الفهرس | Only 14 pages are availabe for public view |
Abstract Self-excited induction generators (SEIG) have been widely used in electric power generation during the last decades especially in isolated areas as a part of wind energy systems. However, the main drawback with the usage of SEIG in electric power generation is the difficulty of adjusting its terminal voltage and frequency at fixed pre-determined required values. This thesis deals with the modeling, simulation and control of a stand-alone SEIG scheme. The system consists of an induction generator, a capacitor bank for self-excitation, and linear and non-linear loads. The non-linear load consists of a three-phase uncontrolled bridge rectifier, a DC filter, and a linear load or an inverter connected to a three-phase balanced resistive load. This is a typical system for windmill applications. The system is modeled and simulated when either the speed or the input torque is considered constant. The performance of the system under study is determined for no-load and loading conditions. The results demonstrate the effect of various parameters such as speed, excitation capacitance, and load constants (R, L) on the transient and steady-state generated voltages, frequency, and output power. |